What Does The Inside Of A Pontoon Boat Look Like?

What Does The Inside Of A Pontoon Boat Look Like?

If you want to buy a Pontoon boat and don’t know what does the inside of the Pontoon boat look like? Then don’t worry.

This article is covering all the aspects that you should know about the insides of the Pontoon boat.

It will assist you in understanding your existing boat or buy a new one.

The pontoon section, maybe more than any other, provides the buyer with more various choices.

It’s possible to build a pontoon that’s a great match for your preferences and location thanks to the wide range of sizes, options, strength, and efficiency.

When you look through the catalogues and websites online of pontoon manufacturers, all of those options can become overwhelming.

Pontoon boats are traditional fishing boats that are often used on tranquil inland waters.

Their distinctive flat-bottomed hull provides sufficient deck space, and their robust pontoon tubes hold them a float.

Important Facts!

Have you ever thought about what a pontoon tube is made of? How does it look like?

While foam-filled tubes are available, but most are hollow.

To detect leaks and help reinforce the tube’s inner walls some pontoons are filled with air.

Many advanced pontoon tubes are chambered, with parts separated within them.

A pontoon tube’s buoyancy is determined by its capacity to displace water.

Just remember that a pontoon tube is normally hollow.

But for some reasons, several of these hollow tubes are chambered.

Foam-filled pontoon tubes are also available in the market, but they are much less popular.

Let’s have a look at the inside of Pontoon Boat!

Tubes With Air In Them

We have told earlier the Pontoon Boats are hollow. Some have air and some don’t. But there are reasons for doing so.

Buoyancy doesn’t get affected by the air-filled or hollow tubes.

The air-filled tubes don’t ensure better efficiency.

But the question that bug is why to use them then?

The two main reasons are stated below.

  • It strengthens the walls of the Pontoon boat tubes from inside.
  • It let us know if the tubes have leakage.

Air-filled pontoons are pretty common among one-man pontoons and portable pontoon boats.

While many pontoon owners will apply air to their pontoon tubes to strengthen the tube’s insides, this is not the primary reason for doing so.

As a final inspection for leaks, producers will insert air.  If air releases from the tube, water will seep into the tube until it is submerged.

This air should remain in the pontoon pipe till the boat owner chooses to lift the drain plug to ensure the tube has not filled on any water.

Hearing air escape from a pontoon tube drain plug is a very positive indication that there is no leakage in the fishing boat.

If the boat captain removes the air in the vent, it could only be accomplished once.

Not a bad strategy though.

It is very quick to over-pressurize a pontoon tube and cause harm.

If you want to avoid ruining your tubes or causing an accident, re-filling a tube with air should be performed with the utmost caution, planning, and the proper equipment.

Follow the instructions in this article if you have air-filled tubes pontoon boat and want to refill them after testing for water ingestion.

Having to fill the pontoon tube with air has little impact on the pontoon’s capacity to float because air adds no weight to the tube.

Tubes With Foam In Them

Pontoon boats with foam-filled pontoon tubes are available.

This, once again, had little to do with rising the buoyancy of a boat.

Adding foam inside a pontoon tube has little effect on its buoyancy, like loading it with air and other alternative air gases have no result on its buoyancy.

In reality, it causes the pontoon to become heavier and less buoyant!

Then what’s the point of filling them with foam?

When the tube is immersed in water, foam makes it float.

Water displacement causes floatation.

The flotation theory describes how much an object floats above water’s surface in water.

The presence of foam inside of the tube becomes advantageous only when the tube lowers below the waterline.

Foam can aid in keeping the pontoon tube from falling to the lake’s bottom.

A foam-filled pontoon tube will not down at the bottom and will aid in keeping the boat afloat just below the water’s surface.

The majority of companies that make foam-filled tubes do so because it costs less.

Foam-filled pontoons are often less expensive to make, but they also allow manufacturers to use lower-quality gauge fabric for tube construction.

Even though there are always exemptions to any rule, the pontoon tube rule is as follows:

Hollow and chambered Tubes pontoons are superior to foam-filled pontoons.

Tubes With Many Chambers

Hollow tubes that have been separated into parts are known as chambered tubes.

Instead of a long single hollow tube, the tube is divided into several compartments, each of which is isolated from the others.

What is the purpose of a pontoon tube chamber?

The main purpose is safety!

When a hollow tube experiences a leak, water begins to enter the tube.

When a pontoon tube loses buoyancy, it can have a disastrous effect on the boat, leading it to sink or nosedive.

Even the tiniest hole or split in a pontoon allows sufficient water.

The tiniest of hole or crack in a pontoon tube that allows water into the tube is more than enough to replace the empty pontoon tube, compromising the boat’s buoyant force and ability to operate at its best.

Companies devised chambered pontoons tubes to address this problem.

Since the inside of the pontoon is divided into parts, a hole or gap in the tubes would only affect a small portion of the tube and not the whole tube.

A leak or crack in the tubes would have next to no effect on the pontoon’s buoyancy.

An effective design feature that can protect your boat is chambering.

Pontoon Construction

Advanced Pontoon Boats have some features that you should know about for better understanding.


As most companies still use wood decking, modern vinyl floor sheets, including Sun Chaser’s Sea Weave option, now come with a “Limited Lifetime Warranty.

“To avoid seepage, these decking covers are usually “screwed” or “bolted”  flat, with the joints located on the cross beams and a tar strip within.  Obviously, the decks are what most people think about when they evaluate a pontoon boat.   In a one person pontoon boat there might not even be a real deck.  While some larger pontoon boats have many compartments and can hold up to 16 people in some cases.  For larger pontoons we highly recommend installing marine led light strips.


The hull of the boat is referred to as the “Pontoons.

” Tubular pontoons are the most durable and common among manufacturers today.

This form of the pontoon is used by SunChaser, which is made of heavy gauge aluminum for puncture tolerance.

Furthermore, each set includes up to three protective baffles that prevent the entire tube from flooding with water within the unlikely scenario that one were to break.

In the unlikely case that a tube is punctured, SunChaser does have a huge molded “keel,” which adds another degree of insulation to the pontoon tube’s rim.


Massive developments, such as new pontoon boats that are stylish and comfortable, as well as furniture that is sturdy and long-lasting.

SunChaser uses long-lasting Roto-cast® seat systems with integrated waterways to efficiently drain moisture.

SunChaser also unites Double Drop Hinges, making them accessible to the under-storage rooms without the seat closing when you bend over it.

Frequently Asked Questions(FAQs)

Are There Chambers On Pontoons?
Several pontoons often have a drain plug present at the rear bottom to enable condensation or collected water to drain.

Round Pontoons with Separate Airtight Compartments: Per pontoon, there are likely at least three, not many more, distinct separate chambers.

What Would You Find Inside A Pontoon?
While foam-filled tubes are available, most are hollow pontoon tubes.

Some pontoons are full of air to help reinforce the tube’s inner surface and detect leaks.

Many new hollow pontoon channels are chambered, with parts separated within them.


We have explained thoroughly the insides of the Pontoon Boat.

Now it is up to you to understand the concept completely and decide what is best for you!

Leave a Comment